High-Precision Register Punch

(Manual Type)

RYOBI RP740-425F

RYOBI RP520-220F

RYOBI RP740-425F

RYOBI RP520-220F

Model

RYOBI RP740-425F

RYOBI RP520-425F

RYOBI RP520-220F

Applicable Plate Size

330 x 300 mm to 745 x 605 mm

(12.99''x11.81'' to 29.33''x23.82'')

323 x 472 mm to 520 x 485 mm

(12.72''x18.58 to 20.47''x19.09'')

323 x 400 mm to 520 x 485 mm

(12.72''x15.75'' to 20.47''x19.09'')

Punched Holes Pitch

425 mm (16.73'') (U-cut punch, Reference edge: Left) 393 mm (15.47'') (Punch for film)

425 mm (16.73'') (U-cut punch, Reference edge: Left) 393 mm (15.47'') (Punch for film)

U-cut punching can be selected by the U-cut punch ON/OFF knob.

220 mm (8.66'') (U-cut punch, Reference edge: Right)

Max. Plate Thickness

Within 0.3 mm (0.012'')

Within 0.3 mm (0.012'')

Within 0.3 mm (0.012'')

Image Measurement Range

Lateral direction: 60 to 720 mm (2.36'' to 28.35'')

Vertical direction: 100 to 550 mm (3.94'' to 21.65'') from bottom of plate

Lateral direction: 90 to 510 mm (3.54'' to 20.08'')

Vertical direction: 59 to 347 mm (2.32'' to 13.66'') from bottom of plate

Lateral direction: 90 to 510 mm (3.54'' to 20.08'')

Vertical direction: 59 to 347 mm (2.32'' to 13.66'') from bottom of plate

Plate micro adjustment Range (^1)

Lateral / Vertical: 2.5 mm (0.098'')

Lateral / Vertical: 2.5 mm (0.098'')

Lateral / Vertical: 2.0 mm (0.079'')

Punching Accuracy

Within 0.05 mm (0.002'')

Within 0.05 mm (0.002'')

Within 0.06 mm (0.002'')

Image Detection Method

An optical 25-power microscope.

Punched Hole Margin

11 mm (0.43'')

Dimensions (LxWxH)

950x450x865 mm (37.40''x17.72''x34.06'')

676x494x460 mm (26.61''x19.45''18.11'')

706x479x512 mm (27.80''x18.86''x20.16'')

Weight

Approx. 75 Kg (165lbs)

Approx. 35 Kg (77lbs)

Approx. 23.2 Kg (51lbs)

Option

RP740-220 kit ^2

RP740-400 kit ^3

RP520-220 kit ^2

---

^1

When you punch the plate, note that the skew adjustment range differs depending on the model of the printing press to which the plate is mounted. Contact the RYOBI salesperson for details.

^2

Die kit for 220 mm (8.66'') pitch U-cut punching as well as film punching. (Can be additionally installed.)

^3

Kit compatible with model DS400 for 400 mm (15.75'') pitch holes. (The standard dies must be replaced with this kit.)

6-6x10 mm (0.24''-0.24''x0.39'') 0blong   Inner margin: 7 mm (0.28'')

Note: The RP740-400 kit cannot be used with the standard 425 mm (16.73'') pitch dies for U-cut punching and film punching.

''DS400'' is a registered trademark of Dainippon Screen Mfg. Co.,Ltd.